RailRider Pro®

Floor Truss Press

A top choice year after year for manufacturing floor trusses.

Request More Information

RailRider Pro®

Floor Truss Press

A top choice year after year for manufacturing floor trusses.

Request More Information


Efficient floor truss assembly

  • The table comes in multiple lengths, all with gantry head parking areas.
  • Pneumatic clamp has automatic depth adjustment for jigging two trusses.
  • Scanners on each side of the press head keep employees safe while also preventing equipment damage.
  • Lots of options for even more efficiency!

RailRider Pro Overview Video

Play Icon

The press, designed specifically for floor truss assembly, accomplishes 100% plate embedment on each pass.

  • The 40' table features 42' of jigging space and comes equipped with gantry head parking areas on both ends
  • A radio-controlled remote allows pneumatic jigging operation from a distance
  • Various ejection methods are available to quickly transition to the next truss
  • See all the options available on the Options page.
  1. Place boards on the infeed side of the table in the correct configuration.
  2. Use the radio-controlled remote to activate pneumatic cylinders that clamp the boards together. The clamp automatically adjusts for the truss width.
  3. Place connector plates on the face-up side of the truss.
  4. Using the pendant controls, roll the gantry head over the truss to completely embed the plates.
  5. Flip the truss from the infeed side to the outfeed side using the optional pneumatic pop-ups or flippers controlled by the remote, or by hand if optional pneumatics are not installed.
  6. Assemble another press on the infeed side of the table while simultaneously placing plates on the face-up side of the truss that is on the outfeed side of the table.
  7. Roll the gantry head over the trusses to completely embed the plates. Once the process is started, a completed truss comes off the table on every pass of the gantry head.
  8. If the on-table splicing is installed, spliced lumber can also be built with every roller pass.
  9. For end-eject systems, pivot the flip-stop on the end eject end of the outfeed side so there are no tools needed to remove jigging before ejecting the truss.
  10. Remove the truss from the outfeed side using the ejection options controlled by the remote, or by hand if optional pneumatics are not installed.
  11. Repeat process starting with step #5.
Physical Data
Dimensions of Gantry
10' 3" wide w/platform
Roller Size
24" nominal OD
Roller Material
1" steel
Throat Opening
7' 4" wide, covers both sides of table
Performance Data
Speed of travel
100 FPM (see Options)
Lumber capacity
Trusses 9-1/2" to 24" wide (see Options)
Direction of travel
Left and right
Pendant for gantry head controls and radio-controlled remote for pneumatic controls
Electrical Data
Electrical Specs
208 / 230 / 460 / 575 VAC, 60 Hz, 3-phase
Uses overhead bus bar or festoon cable
  • On-table splicing: Splicing extensions allow you to lay boards end-to-end so they are spliced together at the same time the roller is pressing the truss.
  • Overhead plate rack: Drastically reduce non-value-added motion by storing multiple plate sizes above the table surface, right at the assemblers fingertips.
  • Increase the truss width capabilities to:
    • 11-7/8" to 26" or
    • 12" to 30" 
  • Dual pneumatic zones to build and eject two shorter trusses instead of one long truss
  • Pendant on opposite side of operation
  • Customized camber on side rail
  • Powered conveyor for end eject systems
  • Pneumatic options:
    • Flipper on infeed side
    • Pop-ups on infeed and/or outfeed side
    • Side-eject lifters on outfeed side
    • End-eject lifters on outfeed side

Download the Full Spec Sheet

Machinery Support & Resources

MiTek offers consulting, testing, documentation, design assistance and prompt customer service. Visit our Support, Training and Knowledge Base center for more information.

Documents Color Icon Img
Machinery Documentation

Access and download equipment manuals, service bulletins, spec sheets and videos.

Learn more
Open Book Icon Img
Training and Education

We offer training online, on the phone, and in person. Get started with Mitek University.

Learn more
Tools Icon Img
Find and Order Parts

View our Parts Guides for our most well-known machinery so you can easily find the part you need to order.

Learn more
Talking Bubbles Icon Img

For questions on our equipment or the software that runs it, you have the support of our entire Machinery Division.

Learn more

Machinery Equipment

View more of the most complete, reliable, and productive component manufacturing equipment in the industry.

<Swipe to View more>