BlackJack 3.0

BlackJack 3.0

BlackJack 3.0 Adjustable Support Columns are designed and tested to meet or exceed the CAN/CGSB-7.2-94 Adjustable Steel Columns standard.

Series: T2JPMD84, T2JPMD88, T2JPMD90, T2JPMD96, T2JPMD102, T2JPMD108, T2JPMD114, T2JPMD120

  • Top plate (4-1/2" x 6") - 3 gauge
  • Bottom plate (4-1/2" x 6") - 3 gauge
  • BlackJack 3.0 Tube (3" x 3") - 10 gauge
  • Top and bottom plate- Grey Primer Paint
  • Tube - Power Coated Black Paint
  • Turn threaded collar to extend the column to the desired height.
  • Secure the top plate to wood beam with four (4) 1/4" x 2" lag screws.
  • Ensure column is installed in a vertical and plumb position.
  • Column base shall be aligned and secured to a proper supporting slab.
  • Top plate shall cover the full width of the supported beam. Beam shall be centered on the top plate and continuous across the entire length of the plate.
  • Square tube may be cut down, ensure cut is smooth, square and level.

    Installation GuidePDF Icon
    Brochure Adjustable ColumnsPDF Icon

Load Table:

table BlackJack 3.0


Column Caps:


Supplementary Top Plates:


BlackJack 3.0 Img