RedJack 2.5 Adjustable Support Columns are designed and tested to meet or exceed the CAN/CGSB-7.2-94 Adjustable Steel Columns standard.

Series: T2JPLD84, T2JPLD88, T2JPLD90, T2JPLD96, T2JPLD102, T2JPLD108, T2JPLD114, T2JPLD120

Materials:
  • Top plate(4-1/2" x 6") - 3 gauge
  • Bottom plate (4-1/2" x 6") - 3 gauge
  • Tube RedJack 2.5 (2-1/2" x 2-1/2") - 11 gauge
Finish:
  • Top and bottom plate- Grey Primer Paint
  • RedJack 2.5 Tube - Power Coated Red Paint
Installation:
  • Turn threaded collar to extend the column to the desired height.
  • Secure the top plate to wood beam with four (4) 1/4" x 2" lag screws.
  • Ensure column is installed in a vertical and plumb position.
  • Column base shall be aligned and secured to a proper supporting slab.
  • Top plate shall cover the full width of the supported beam. Beam shall be centered on the top plate and continuous across the entire length of the plate.
  • Square tube may be cut down, ensure cut is smooth, square and level.

    Installation GuidePDF Icon
    Brochure Adjustable ColumnsPDF Icon

Load Table:

table RedJack 2.5

 

Column Caps:

T2CC

Supplementary Top Plates:

T2TP

RedJack 2.5 Img